¶ Overview
- The ISO file has been tested in both physical servers and virtual environment ( ESXi, HyperV, XenServer, Nutanix, KVM).
- The ISO is in charge to install both the system and Artica framework, in all environments, the procedure is the same
¶ Getting Started
- Download the ISO file at http://articatech.net/download.php or artica-full-4.50.000000.debian12-amd64.dvd.iso
- Configure the server or virtual machine to boot from the ISO.
- Start the server or virtual machine.
¶ Installation
¶ Welcome Screen
¶ Select your system language, country and the language of the keyboard.
¶ Network
The ISO installer is DHCP client by default it will try to find an IP address through the DHCP. If there is no DHCP, it will ask to enter the IP address.
Sometime the TCP settings is not saved after the reboot, in this case you will have to re-enter it after the reboot.
¶ Partitions
¶ By default, the install tool will create system partitions
¶ Finish Installation
¶ First Boot
During the first boot, Artica is extracted and installed on the system.
The server may reboot several times.