¶ Overview
It is possible to setup two gateways for one single Interface
If the main gateway is down, the system will switch to the second gateway automatically.
¶ How to Setup
- On the left menu, choose Network and Interfaces
- Select the Parameters tab
- Click on the desired network interface.
- Click on “Multipath” tab
- You will see in the table your main gateway originally assigned to the Interface.
- Click on “New gateway”
- Add the second gateway IP address and set its weight.
If you define the weight as the same value as the main gateway, the system will process in a round-robin way.
If you define the weight up to the main gateway, the gateway two will be used only if the main gateway is down.
